Home > Intel Rapid > Intel Rapid Storage Technology An Unknown Error Occurred While An Operation Was In Progress

Intel Rapid Storage Technology An Unknown Error Occurred While An Operation Was In Progress

All the rest are unavailable. But for me I can stop at step 19 and then Rapid Storage starts working without producing the error message. Once we know the SSD is clean of any Intel partitions we need to re-initialize it. Contact us about this article So i have been using the built-in ntel Raid controller on my X58 Motherboard.   And now the Raid Partition is missing...   The intel Matrix weblink

On it I can change SATA mode to RAID, IDE, AHCI, DISABLED. i just want the machine to boot like normal.. Please restart your computer, and then try the operation again. Maybe the software had issues after resizing the partition?

A bit of background, I bought a Dell XPS 15 (9530) recently and it is advertised to run both Intel technologies together. I thought that IRST was the issue so i built a brand new Windows 8 machine with a SSD and removed the 32 GB mSATA card. I purchased a cheap Kingston 120GB V300, which has moderate read speeds but terrible (160MB/s) write speeds - but still faster than a hard drive, particularly at random reads/writes. Sorry for the delay but Rams got in the way.

  • I can't help.
  • Do these two techs run on the minimum specs Dell have provided or do they need the minimum specs that Intel specifies to work properly.
  • By initialize, do you mean create new volume, and set the volume size to 30 GB?
  • After thinking more you can't even get to the menu to create the partition because the tab is not there?

I thought the SSD needed to be unallocated for Smart Response? I am still not sure what re-sizing does to the drive but it must change a bit somewhere that allows the software to do its work. I rebooted my computer and then ran the tool again, when I looked this tool had created a 18.6 GB partition on the SSD and it was all setup other then My computer is a Dell Vostro 3560 with 32 GB SSD and 8 GB RAM.

You have got me out of deep water. MCM I will. I am glad I could help! Once you have verified this you can go back into Windows.

while installing OS I only see the hdd in the option and no msata. Can you go to disk management and send me a screenshot of your disks you have installed, the whole window? You saved me so much time trying to figure this out on my own. TJ Thanks so much for this!

The more details of your attempts and error will help me better see the possible issue! Dell partition the SSD with 8GB for for the Rapid Start partition and 22GB for the Smart Response partition.   I have contacted Dell to clarify this as the system does There will be a folder in there called ‘f6flpy-x64' in that folder take all those files and put them on a flash drive. and also all the sound system in vaio became unclear i tried uninstalling and installing intel rapid storage techonlogy driver but i have an error "fatal error ocured during unistallation "and

Brilliant and thanks a lot! http://madeleinebrand.com/intel-rapid/intel-rapid-storage-an-unknown-error-occurred.html Anyone know what's stopping me from increasing the size? There are several articles out there that point to a similar solution, but incomplete. but the utility is gone, the drivers say they are Standard AHCI drivers in the Device Manager so I don't know what else I can do...

Followed all the steps and everything worked out perfect! To do this I am considering that the way is: 1) Delete the Volume of 8.02 GB using the Disk Management 2) Disable the Acceleration on the Rapid Storage Technology Management So I should just start installing os and when it ask to choose the disk I just load the drivers and after os installation is complete just install the irst software check over here Caspan Thanks Helio!!

Go to the Serial ATA section and download the ‘Intel Rapid Storage Technology Driver' when you run it tell it to extract the files only. Fredrik Jonsson Didn't opt out and I'm using Rapid Start, but I just skipped the math for the size option. I am not sure I understand you comment about the C drive D drive re-size comment.

Windows 8 Pro.

If not you can right click on the label for the disk it and chose Initialize Disk. I then rebooted and the acceleration worked! After I rebooted and logged into my desktop Intel Rapid Start Technology program threw up an error Your system does not appear to have Intel Rapid Start Technology enabled. Claim or contact us about this channel Embed this content in your HTML Search confirm cancel Report adult content: click to rate: Account: (login) More Channels Showcase RSS Channel Showcase 1318890

Atheist I did it :D YEAH !!!! urbanriot, Oct 12, 2010 urbanriot, Oct 12, 2010 #1 (You must log in or sign up to reply here.) Show Ignored Content Your name or email address: Do you already have The operation could not be completed. http://madeleinebrand.com/intel-rapid/intel-rapid-storage-technology-enterprise-unknown-error.html What it sounded like was all I needed to to do is re-create this partition and then I could enable it in BIOS again and install the software.

So you completely opted out of the Rapid Start then? I have placed the exact steps I take to fix the issue now. After uninstall RST and disabled it on the BIOS, the system is running very well (even without have changed yet the memory to 16 GB RAM). This got it working for me.

Kevin Thank you!!!!! Say thanks by givingKudos!How do I know what memory to buy?Still need help? Thanks everyone! No, create an account now.

Can you give me some guidance on how to do that?What are the next steps after that? This again seems plausible and in theory it sounds like it should work, please let us know how it goes.. This would be fine if the last volume on the disk is a D drive but not if it is the C. Caspan Sorry it would be the SetupRST.exe file MCM I was thinking about it, but thought it was better to stick to the one offered by the manufacturer.

The XPS 14 only comes with software that allows you to create a rescue flash drive that is an exact copy of the current image.  To be honest using the Dell It does not have to be the same amount of main memory. You can open it from Control Panel > Administrative Tools You should get a popup stating that you need to initialize the disk first before you can use it. I tried to disable acceleration and enable acceleration but got the error An error occurred and the selected disk or volume could not be accelerated.

Problem is Windows has no idea how to talk to about 90% of these RAID controllers. I have a "Crucial M4 CT064M4SSD2CCA 2.5" 64GB SATA III MLC Internal Solid State Drive (SSD)". yes no add cancel older | 1 | .... | 24 | 25 | 26 | (Page 27) | 28 | 29 | 30 | .... | 149 | newer HOME MCM I've attached the SATA settings section of BIOS.

So in total to run both technologies together on this system I would need an SSD with a minimum of 34.6GB.